Total Pageviews

Tuesday, 11 April 2017

Farewell Post + DCAM Dies + Thanks !

Hello Everyone, Piyanki here today with my last post as DT for DCAM. It has been a exciting 6 months working with my fellow DT from across the world. Learned a lot, shared our learnings and we all have spent a Happy place at the DCAM.

Thanks to Mansi who liked my project and wanted me to be in the team. She has believed in our work and always encouraged us to do more and pushed our limits to create beautiful projects.

I have listed all my favorites from DCAM that I total enjoyed working with and have used it again and again. But before that I would like to show my project for today.

I have used the dies to create a side Border and create some Shaped Book Marks. I thoroughly enjoyed the process cause Bookmarks can be fun and easy to make.

I had so much fun creating these shapes, I took out some non-DCAM dies to add to the list of bookmarks.

Used stamps from my stash to create the background and the sentiments. Completed the bookmarks with some stitched borders and ribbon.

For the above I used the basic square Dies from DCAM and created a shaker using the sequence. Also Used the Its a boy Sentiment.

Now to my favourite products.

....And Many More....

Its been a happy, exciting 6 months that comes to an end! However working with the DCAM products will be a cherishing moment.

You can find us 

Thanks to all the readers for the comments, the appreciation, love ! Hope I could inspire you all with my work!

See you all around the crafty table!
Love and Hugs!

Friday, 31 March 2017

DCAM Jumbo How to with 3 layer stamps by LeeAnn

Greetings fellow crafters. LeeAnn here with my final post as DCAM DT Manager. Time sure has flown since the team was chosen, and we all started posting.

So for today's project, I used an Altenew stamp/die set that came in a magazine last year. Currently, this is the only multi-layer set I own, so it was the best to use for this. If you watch the video in full-screen mode it has subtitles for how or why I did each step. 
I used Powderpuff Chalking Inks to stamp the flowers with, the lightest being Cherry Blossom, then Rose Petal and final Fuchsia.
Once I had my stamped flowers complete and let them dry, I used the WineTag die to cut a sheet of cardstock. I then mixed some Ranger Texture Paste and Barn Door Distress Ink to a smooth consistency and swiped it over the Bricked stencil.
Once the texture paste was dry, I used clear tape to adhere the silver pearl spray, and then double sided power tape to adhere the flowers. The top flower is adhered with foam tape to give it added dimension.
Using silver mirror paper I adhered a section adhesive sheet to the back and then cut out the word Sparkle. Using the adhesive sheet made it sticky once the backing was removed so that it would be easy to adhere without glue sticking out all over.
I then used Silver Glitter Wink of Stella on the flowers in various spots to add a little shine.
For a finishing touch, I added a black panel under the cut tag.

I hope you have enjoyed this project as much as I enjoyed making it. Please have a wonderful day. Follow my blog here to see more projects.
Sparkle Die
Barn Door Ink
Adhesive Sheets

Wine Tag Die
Bricked Stencil
Texture Paste
Foam Squares

Monday, 27 March 2017

Stampoholic Tutorial

Hello friends,

Today I am sharing a tutorial to create a beautiful background using the Stampoholic. Here is the card where I created the background using a single stamp.


The method is bit tricky but once you try it out it will be easy and you can create any background.
Hope you like my tutorial. Here is the video tutorial:

Products used


Card Shaper Dies
Happy crafting!

Do follow us on these social sites:

The website is updated with a new look and is ready to take orders from USA, Canada, Guam, Mexico, Australia and New Zealand, all other countries will be added soon.

Saturday, 25 March 2017

Best Wishes!

Hello Dear Friends, Welcome to the DCAM Blog! Piyanki here today with some new cards and very simple technique.

I am using some of the old released dies today along with the DCAM Stencils. Both my cards use the same technique with different Designs.

How To:

1. Use the Double Stitched Square Dies and die cut a window out of Copy Paper.
2. Use the Die cut as the masking tape.
3. Use the Floral Designs and Ocean Spray Stencil to create the Masked area.
4. Die Cut multiple layer of Best Wishes Die.
5. Adhere all together and place it.

Thanks for stopping by. Do share how you like it and also do give it a try. Its simple and CAS.

Untill then Happy Crafting!

Product Used:

You Can find us:

Thursday, 23 March 2017

Shaker card and tag set

Hello friends,
 today i made a set of shaker card and tag using DCAM dies.I have used the plaid papers from Lawn fawn to make some colorful background for my shakers
I have used several layers of diecuts to make the shaker part which gives more room for the shaker than the foam tape.The cute stamp is from MFT which i colored using zig markers.
I have used some twines,button and crystal drops to finish off my card.

Supplies used:


Thank you for stopping by,

The website is updated with a new look and is ready to take orders from USA, Canada, Guam, Mexico, Australia and New Zealand, all other countries will be added soon. 
Thank you so much for playing along with us and have a great day. Please follow DCAM and the team on various social media platforms. 

Friday, 17 March 2017

DCAM Spring Holidays with LeeAnn

Greetings crafty friends. LeeAnn with a couple of fun projects I made highlighting projects from DCAM.
First I used stencils and various Shimmer Sprays to complete the full 12x12 background.

I then stamped and colored my images with Spectrum Noir Markers, used the border die to cut out this 12x12 pattern paper to be a dance floor, I cut half, then turned the die around, lined it up and cut the other side. I cut a couple of circles with the inverted circles, one out of pattern paper and one from white. Stamped the sentiment on the white using the Stampoholic and then using the yellow ink pad I swiped it to be like the sun. 

Project 2
This next project I used the envelope die cut

 I first spritzed the paper with water, then sprinkled on the Color Burst Powders, as soon as it hit the water the colors went crazy. I added a few more spritz's of water and really loved the results.
 I used the Celebrate die to cut from the extra front panel, I then did the same spritzing with the color bursts. Once it was dry I affixed the Celebrate die back in and adhered it to the front of the envelope.

Using the stamped images I colored with my markers then affixed them to the back of the envelope. My grandson will find this in his Easter Basket next month.

DCAM Product Used:
First project

Second Project:

NON DCAM Product Used:
Prima Julie Nutting Valentina
Ranger Adirondack Brights Sunshine Yellow
DCWV Latte Love Pattern Paper Pack
Spectrum Noir Markers Used:
Hair: GB3, GB6, GB7, GB10
Skin: FS2, FS5, FS6, TN2
Shirt/Dress: LG1, LG3, JG1
Pants: BGR1, BGR4, BGR5, GG4, GG5
Shoes: True Black
Bunny: EB1, TN1
Eggs: Memento Markers Campfire Collection
MamaElephant Bunny Stamp
Joy Clair Easter Stamps

I hope you have enjoyed my post. 
The website is updated with a new look and is ready to take orders from USA, Canada, Guam, Mexico, Australia and New Zealand, all other countries will be added soon. 
Thank you so much for playing along with us and have a great day. Please follow DCAM and the team on various social media platforms.