Total Pageviews

Friday 18 October 2013

Tealight Holder Tutorial

Hello friends,

Its Sachi  here, and this time I am going  to share a Tea-light Holder tutorial . Here is how it looks -




These can be used as dinner table centerpieces ,they can add a beautiful glow with the flicker of the tea light with the lights out. They can also be make a great gifting option for any sweet treats or favours

Here 's a closeup-

On the inside i have covered the windows with white netting and a lattice frame . The layered  pale pink flowers are from the MB Cherry blossoms set. The French Lily Corners have been misted with the Pearlescent strawberry Mist , doesn't it just give a gorgeous shimmer along with the pink hue ?



Have also added the Crystal Dust Transparent glitter , you can see here closely -



Now lets get started with the Tutorial !

To make this you will need -

A Cutting Knife & Mat
Ruler
Bonefolder
MS Scoreboard
A thick cardstock 

Steps-

Step 1
Take an A5 sheet of paper with a total length of 21 cms (10 cms for each square plus one cm for the glue flap) On your scoreboard score the horizontal side at 0 and 4/8  , 3 and 7/8th , 4 and 4/8th  , 5 and 1/8th 7 and 7/8th , 8 and 3/8. Just to simplify every line on the scoreboard measures 1/8th inch .



Step 2
Now flip the paper vertically and score at 10cms(equal to 3 and 7/8th ) plus 3.94 cms for the glue flap . There is a wonderful must watch video tutorial on this link to make a layman understand the MS scoreboard measurements easily -
http://www.annespapercreations.com/2012/10/how-to-measure-on-martha-stewart.html

 Step 3
Now we will cut 2 windows between the 1st and the 2nd and the 4th and 5th scored lines as marked. Measure 1/2 an inch from the top and the bottom of the sheet and on both sides . Basically ensure that the width of the square on all the four sides should be equal .

Step 4
You would need to cut 2 panels with 4 windows for each side of the square box.After cutting the 2 squares , this is how it would look-




Make all the folds using a Bone folder and adhere the 2 panels together with the glue flaps as shown-Its best to use a double sided tape here to ensure that the 4 pillars do not bend .





Step 5
You will also need to adhere the square on a card base of 10 cm by 10cm and your tea light box is ready !

This is how it looks with the tea light inside -



Hope you like my tutorial , do let me know if you have any questions or suggestions.Would love to hear from you . Thanks for stopping by and do not forget to share your beautiful creations for the ongoing Challenge No 3 # Photo Inspiration !




12 comments:

  1. OMG!!! This is just Awesome Shachi... Thanq for the wonderful, detailed Tut.

    ReplyDelete
  2. I loved the holder n tutorial both sachi ! You have made it look so romantic n lovely with your embellishing !

    ReplyDelete
  3. Very preety

    ReplyDelete
  4. Very preety

    ReplyDelete
  5. Wow sachi ! Just ahead of diwali you have shona a super cool pictorial ! Thanks a ton !!

    ReplyDelete
  6. Very Very pretty love the holder and thank you for the tutorial

    ReplyDelete
  7. Very Very pretty love the holder and thank you for the tutorial

    ReplyDelete
  8. this is awesome....amazing tutorial Sachi....

    ReplyDelete
  9. woah! This is so pretty! Thanks for sharing the tutorial surely going to try this!

    ReplyDelete

Thanks for your visit to our blog...do visit us again.